Modeling and optimization of artificial magnetic conductor on the performance of on-chip-antenna for 28 GHz devices

Modeling and optimization of artificial magnetic conductor on the performance of on-chip-antenna for 28 GHz devices

Efficiency
Gain
Patch gap
Patch width
Response surface method
Substrate height

The growing popularity of chip-based devices has spurred interest in developing on-chip antennas (OCAs). However, low gain and poor radiation characteristics have been significant challenges. Integrating an artificial magnetic conductor (AMC) into the oxide layer is an alternative. This article presents a new AMC model that improves the performance of 28 GHz OCA using dual-rectangular-patch (DRP) as unit cells. The DRP parameters, patch width (Pw), patch gap (Pg), and substrate height (hs) were used to control the AMC characteristic. Two numerical equations for gain (G) and efficiency (η) have been developed to evaluate the new model’s performance. The impact of parameters on the antenna’s gain and radiation efficiency was equally analyzed. A prototype antenna was fabricated and tested to validate the model. It demonstrated a peak gain of 3.69 dB and radiation efficiency of 67.18%, with an achieved impedance bandwidth of 1.27 GHz, making it well-suited for 28 GHz device applications. Furthermore, the equations formulated provide the research community with a straightforward method to calculate the gain and efficiency of a 28 GHz antenna. This method is not limited to OCA but can also be applied to off-chip antennas if DRP-AMC is implemented.

Ahmadu Girgiri1, Mohd Fadzil Ain1, Mohd Zamir Pakhuruddin2, Mohamad Faiz Mohamed Omar3,4, Bello Muhammad Abdullahi1

Journal homepage: http://telkomnika.uad.ac.id

Sep 20, 2024

PERI IRAWAN

PDF

ENGLISH

TEXT