Simulator Proses Pengisian dan Pemasangan Tutup Botol
Terkendali PLC Berbantuan Miniatur Konveyor

Simulator Proses Pengisian dan Pemasangan Tutup Botol
Terkendali PLC Berbantuan Miniatur Konveyor

: A miniature of the conveyor machine, embedded system, programmable logic controller system, simulator for the
process of filling and installing bottle caps.

A miniature conveyor machine assisted by embedded systems and controlled by a programmable logic controller (PLC) has
been fabricated with the operating mechanism is based on the detection of two different colors. The objectives of this research
are to obtain a miniature machine is controlled by the PLC system, create a ladder diagram-based program structure, and
measure the performance of the embedded system. Obtaining the machine is carried out through assembly of the conveyor
frame, installation of all devices, and integrated wiring. The programming for the Omron PLC system is based on providing
the CX-Programmer 64 bits, establishing algorithms and compiling ladder diagrams, and compiling and uploading processes.
The performance measurement includes synchronization conditions between the simulator and the control system, observations
of the readings of installed sensors for activating all devices on the output side, and observing the measurement of the filling
process time and the installation of bottle caps assisted by the pneumatic system. The results of the performance during the
process of filling and installing the lid obtained a success rate of 75%, based on four trials, three successes, and one failure.
The general conclusion is that the embedded system that has been built can be used as a simulator for the mechanism of filling
liquid into bottles and installing bottle caps, and it is as an implementation of instrumentation and automation processes.

Anang Dwi Purnomo1
, Arief Goeritno2*
, Danang Adi Nugroho3

, Universitas Ibn Khaldun Bogor

: 25-08-2021

Fajar bagus W

PDF

Indonesia

Text