Pengembangan Embedded Device Berbasis PLC
untuk Simulator Rejection System
dengan Penambahan Human Machine Interface

Pengembangan Embedded Device Berbasis PLC
untuk Simulator Rejection System
dengan Penambahan Human Machine Interface

analogy of conveyor, HMI, PLC, simulator of rejection system.

Changes to the simulator rejection system from the previous research were carried out by replacing all sensors, drive motors,
PLC systems, and adding HMI systems. The objectives in this research, namely (i) changing and developing a rejection system
simulator, creating a ladder-based program structure and configuring HMI systems and (ii) measuring the performance of the
simulators. Rejection system simulator is fabricated and reassembled, ladder-based syntax into PLCs and HMI is also
configured, and observing the performance is done through the HMI layer. The results of programming is carried out through
(i) providing software for PLCs, (ii) programming the PLC system, (iii) compiling and uploading programs from PC to PLC,
(iv) configuring PLC and HMI via ethernet, and (v) compiling and uploading the program structure from PC to HMI. The
performance for observing the condition of the bottle cap through the HMI is observed when (i) synchronization between the
simulator system and the HMI-assisted PLC control, (ii) the reading of the sensors installed on the simulator, and (iii) the
rotation process of the rejector arm. Overall, the rejection system simulator with a PLC-based assisted by HMI can be used as
a process simulation against the implementation of the rejection system.

Riyandar1
, Muhamad Wildan2
, Arief Goeritno3*
, Joki Irawan3

Universitas Ibn Khaldun Bogor

: 30-12-2021

Fajar bagus W

PDF

Indonesia

Text